Auto Finesse Imperial is a dedicated acid-free alloy wheel cleaner.

Auto Finesse Imperial is an acid-free alloy wheel cleaner that contains a powerful blend of cleaning agents and degreasers that removes brake dust and grime from your wheels. Auto Finesse Imperial has a high-foaming formula that makes light work of a wheel cleaning and is safe on all wheel finishes.

Its highly concentrated formula is economical, safe to use on all modern coated wheel finishes, and is gentle enough that it can even be used for cleaning tyres.

IMPERIAL

• Non-acidic wheel cleaner.
• Powerful cleaning agent to remove brake dust and road grime.
• Contains degreasing agents.
• Wheel sealant friendly.
• Safe for regular use on all wheel finishes.

IMPERIAL

Imperial acid-free wheel cleaner, the quick, safe and easy way to clean your favourite wheels by Auto Finesse®

Application:

Alongside Imperial, you'll need two types of brushes; a dedicated wheel brush for the barrels of the wheels and a smaller ‘detailing brush’ for the faces and wheel nuts, a separate bucket to rinse out your brushes and a Microfibre Drying Towel to dry. Use a pressure washer to remove any loose contamination before spraying each individual wheel liberally with Imperial and allow to dwell. Start with the wheel brush, cleaning in between the spokes, and reaching into the barrel of the wheel to break loose as much of the brake dust as possible. Then use the detail brush to clean the face and lips of the wheels, as well as around the wheel nuts. Also, take this opportunity to thoroughly scrub the tyres, removing the old dressing in preparation for a new coat. Afterwards, you can rinse or pressure wash off the remaining brake dust and cleaner residue before drying off using the microfibre.

If iron or tar based fallout is still present after cleaning with Imperial wheel cleaner, try the Auto Finesse® Iron Out and/or Auto Finesse® ObliTARate.

Imperial is safe to use on all painted, clearcoated, and powdercoated alloy wheel finishes. Chrome, bare polished aluminium, or anodized finishes should be treated with extreme caution. These types of wheel finishes are most common on aftermarket wheels, and should be cleaned with a mild exterior all-purpose-cleaner like Auto-Finesse® Citrus Power.

Do not apply Auto Finesse® Imperial wheel cleaner if the wheels are warm, in direct sunlight, or the ambient temperature is below 0-degrees Celsius.

How to use Auto Finesse Imperial -
1 - Use high pressured water to remove any loose contamination before using the wheel cleaner
2 - Spray each wheel liberally with Imperial and allow to dwell
3 - Use a wheel brush to break loose as much of the brake dust and dirt as possible
4 - Rinse the wheel using high pressured water